Storage and handling checklist for titanium dioxide and lithopone

Industrial production facility

Inspect incoming packaging

Check bag condition, grade labels and batch numbers against the delivery documents. Record damage or moisture exposure before moving material into storage. Retain the lot identification so a warehouse issue can be traced to the correct shipment.

Follow the product’s storage instructions

Use the current SDS and packaging instructions for the supplied grade. In general, protect unopened bags from moisture and contamination and store them in a suitable dry area. Follow the supplier’s stacking guidance and use appropriate pallets and handling equipment.

Control dust during handling

Use the exposure controls and personal protective equipment specified by the workplace assessment and SDS. Plan bag opening and powder transfer to reduce dust release. Avoid practices that disperse deposited powder into the air.

Check material before use

Keep opened material sealed and clearly identified. Investigate damaged packaging, unexpected agglomeration or contamination before adding pigment to production. Ask the supplier about recommended storage periods and the checks needed if material has been stored for an extended time.

Use the Longtai online product catalog guide to identify the exact grade before asking for its handling documents. The UK HSE guidance on COSHH risk assessment explains a UK workplace assessment approach; apply local requirements and the supplied SDS to your actual task.

Longtai titanium dioxide plain export bag, generic packaging illustration
Illustrative export-style titanium dioxide bag. Actual packaging and handling instructions must match the supplied grade.

A receiving-to-production handover

StageActionRecord
ReceivingInspect bags and pallets for damage, moisture and readable labels.Photographs, grade, batch, quantity and delivery condition.
Quarantine or releaseCompare identity and documents with the purchase specification.COA, sample identification and release decision.
StorageKeep bags protected, segregated and identified.Location, receipt date and any storage restrictions.
Production issueVerify the material and control powder handling.Batch used, quantity and the production order.

Separate a torn, wet or unidentified bag from released stock and investigate it before use. A visual inspection cannot establish chemical identity or demonstrate that a damp material will disperse normally. Retain traceability when a bag is opened or material is transferred to another container.

Keep the control measures specific to the material

Use the supplied SDS to establish ventilation, personal protection and cleanup measures. Avoid sweeping methods that unnecessarily spread dust; choose an appropriate cleanup method based on the workplace assessment. Storage time and bag condition should be evaluated against the supplier’s instructions rather than an assumed universal shelf life.

For titanium dioxide, begin with the available TiO2 SDS and confirm its grade applicability. Request a separate SDS for lithopone. The lithopone packaging checklist provides a complementary shipment and warehouse review.